# NZ Plywood

**URL:** <https://community.wikihouse.cc/t/nz-plywood/1049>\
**Category:** Manufacturing Skylark blocks\
**Created:** [1 September 2024 22:31 UTC](https://community.wikihouse.cc/t/nz-plywood/1049 "2024-09-01T22:31:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Guy\_Hollister](https://community.wikihouse.cc/user_avatar/community.wikihouse.cc/guy_hollister/32/782_2.png) [@Guy\_Hollister](https://community.wikihouse.cc/u/Guy_Hollister)\
**Post date:** [1 September 2024 22:31 UTC](https://community.wikihouse.cc/t/nz-plywood/1049/1 "2024-09-01T22:31:05Z")

</div>

Any suggestions about which ply to use when about to build a small shed under SkyLark and it will not be lived in. So no consent. Just a removable building.

---

<div class="post-metadata">

**Author:** ![lachlan](https://community.wikihouse.cc/user_avatar/community.wikihouse.cc/lachlan/32/57_2.png) [@lachlan](https://community.wikihouse.cc/u/lachlan)\
**Post date:** [2 September 2024 05:02 UTC](https://community.wikihouse.cc/t/nz-plywood/1049/2 "2024-09-02T05:02:11Z")

</div>

Hi Guy,

I couldn’t find an NZ pine plywood that was 18mm (it was all 17 or 19mm); I ended up going to Bunnings and getting plywood through IBS Ply - they can provide an H3.2 treated CD Plywood (I think it’s Chilean) that does the job quite well.

---

<div class="post-metadata">

**Author:** ![Guy\_Hollister](https://community.wikihouse.cc/user_avatar/community.wikihouse.cc/guy_hollister/32/782_2.png) [@Guy\_Hollister](https://community.wikihouse.cc/u/Guy_Hollister)\
**Post date:** [6 September 2024 08:48 UTC](https://community.wikihouse.cc/t/nz-plywood/1049/3 "2024-09-06T08:48:03Z")

</div>

I have had no trouble getting 18mm.

g