# W-L-A seam

**URL:** <https://community.wikihouse.cc/t/w-l-a-seam/1574>\
**Category:** About WikiHouse\
**Created:** [12 October 2026 15:54 UTC](https://community.wikihouse.cc/t/w-l-a-seam/1574 "2026-10-12T15:54:12Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![isvaljek](https://community.wikihouse.cc/user_avatar/community.wikihouse.cc/isvaljek/32/731_2.png) [@isvaljek](https://community.wikihouse.cc/u/isvaljek)\
**Post date:** [12 October 2026 15:54 UTC](https://community.wikihouse.cc/t/w-l-a-seam/1574/1 "2026-10-12T15:54:12Z")

</div>

Is this rendition of the W-L block the intended design of the seam? I am asking because the source files are not as precise to infer the information from them. Was the intention to have 45mm dovetails with -22.5 to 22.5 around 900mm datum line? Or was the intention different?

 ![w_l_a_proposed](https://wikihouse-community-discourse-files.s3.dualstack.eu-west-2.amazonaws.com/original/2X/a/ae71fa29c66333ad8ce98d109e85aa95f56df874.svg)

---

<div class="post-metadata">

**Author:** ![lachlan](https://community.wikihouse.cc/user_avatar/community.wikihouse.cc/lachlan/32/57_2.png) [@lachlan](https://community.wikihouse.cc/u/lachlan)\
**Post date:** [24 October 2026 07:01 UTC](https://community.wikihouse.cc/t/w-l-a-seam/1574/2 "2026-10-24T07:01:37Z")

</div>

Could you clarify the question?

---

<div class="post-metadata">

**Author:** ![isvaljek](https://community.wikihouse.cc/user_avatar/community.wikihouse.cc/isvaljek/32/731_2.png) [@isvaljek](https://community.wikihouse.cc/u/isvaljek)\
**Post date:** [24 October 2026 09:36 UTC](https://community.wikihouse.cc/t/w-l-a-seam/1574/3 "2026-10-24T09:36:13Z")

</div>

Sure - the question is specifically about the design intention, or if you will, about the drawing constraints. Questions like:

- what was the intended radius of rounded edges
- what were the actual lengths that govern the mouth of the pieces
- is the angle a constraint or is it a derivation of some other constraint
- what exactly was the intended length of the seam central horizontal position

Basically I am looking at the design properties and rationale, not the measures. Published models are sometimes self-explanatory (e.g. a 150.00123 wide tab is meant to be 150mm wide). But some of the connections do not reveal their intended design, and reverse engineering those is not my favourite game 😅

In a time before time you would call this a technical drawing 😊
