hi everyone, I’m playing with the design of the barn that would have a half floor to put an extra beds. but I noticed that it cant be done ? as the floor is 380mm and the walls have a step of 300mm I always end up with the diffrence, that would have to be filled somehow.
Also idealy I would love to see some lower wall segments as with 6m span the only combination that works is a S wall on one side and XL on the other. And that is way too high for the loft bed place. I’d love to see 2 compatible wall segments, that would work with S wall on the high end. and on the low end it would be some 1200mm, (as the heigt offset of the xl 10deg slope is exactly 900mm) , the other missing part would be a wall with added floor spacer so 1580mm.
Is the parametric magic of 1.0 is going to solve that?
TIA
Maciej